|
 |
|
|
|
|
Quality » maintenance
- Washing method – machine washing (water) in drum washing machine or hand washing.
- Washing agents:
- white knitted fabrics – detergent proper for white products in quantities specified on package;
- colour knitted fabrics – detergent without whitening agents and enzymes in quantities specified on package.
- Rinsing - several times in warm and cold water.
- Dehydration - by squeezing out or spinning (the latter recommended for monochromatic knitted fabrics).
- Drying - after dehydration, shake the product lengthwise (along the weave "columns"), reinstate the original shape and dry by hanging out or stretching (do not dry in drum driers, by exposing to sun, putting on heaters, etc.).
- Washing water and ironing temperatures - pursuant to table below:
Knitted fabric symbol
(example) |
Raw material |
Finishing type |
Washing bath temperature |
Ironing temperature |
| 3490, 3737 |
100% COT |
white |
95°C |
200°C |
| 1060, 3756 |
100% COT |
dyed/printed |
40°C |
200°C |
| 3945 |
COT + PE |
white |
60°C |
150°C |
| |
|
dyed/printed |
40°C |
150°C |
| 2867, 3230, 4047 |
100% PE |
white/colour |
40°C |
not required |
| 1081 |
PE + COT |
white/colour |
40°C |
not required |
| 1835 |
COT + EL |
white/colour |
40°C |
if required, via protective cloth, 150° C |
- Each piece of knitted fabric is accompanied with a maintenance instruction with symbols explained in the table: (SCANNED ATTACHMENT WILL BE ADDED!)
 |
Avoid machine washing at a temperature above 40 ºC.
|
 |
Normal machine washing, rinsing at a temperature below 60 ºC and drying. Rinse at a gradually reduced temperature and use protective drying. |
 |
Hand wash only, squeeze gently at a temperature below 40 ºC. Do not rub or wring. |
 |
May be bleached with chlorine or non-chlorine bleaches. |
 |
Only use non-chlorine bleaches, when needed. |
 |
The temperature of the bottom ironing plate should not exceed 110 ºC. |
 |
The temperature of the bottom ironing plate should not exceed 150 ºC. |
 |
The temperature of the bottom ironing plate should not exceed 200 ºC. |
 |
Do not iron. |
 |
Do not dry clean. |
 |
Dry clean with tetrachloroethane, petrol, trifluorochloroethane or monofluorotrichloroethane, by normal treatment. |
 |
Do not dry in a drum dryer unless safety precautions are used. |
 |
Do not dry clean using tetrachloroethane, petrol, trifluorochloroethane or monofluorotrichloroethane. |
|
|
|
| design by VENTI |
|
|
temp. -21 °C press. 1027 hPa
